INTRODUCTION

This is a driver for a generic USB postscript printer.  Details
of installation and usage can be found in the README_INSTALL.rtfd
file.  Briefly, after installation, you will be able to print to
a USB printer using the standard NextStep/OpenStep print panels.
This driver should work under both NextStep 3.3 and OpenStep 4.2.

You must have either the UsbUHCI or UsbOHCI driver installed for
this driver to operate properly.

If you have any problems, questions, or comments, you can reach 
me at the address below.

Thanks for your interest,


Howard Cole
Tucson, AZ
hcole@gci-net.com